System Programming Position Assignment - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

Basic System Operating Conditions
System Programming Position
Assignment
Use this procedure to reassign the station jack used for system programming.
This jack should not be the same jack used for the operator position.
The system programming position can be reassigned only to one of the first
five jacks on the first MLX module. Only one system programming console is
allowed per system.
If you are programming on the console:
The console must be connected to the station jack currently assigned
for system programming.
As soon as you change the system programming jack, the system
programming session is terminated. To proceed with system
programming, you must connect the system programming console to
the newly assigned station jack and re-enter system programming.

System Programming Position Assignment

1-3