Did Trunk Type - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

DID Trunks

DID Trunk Type

Use this procedure to specify the type of DID trunk as either immediate-start
or wink-start.
NOTE:
DID trunks apply only in Hybrid/PBX mode.
Summary: DID Trunk Type
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
Hybrid/PBX
DID trunk idle
Form 3d, Incoming Trunks – DID
Wink-start
Immediate-Start, Wink-Start
No
No
LinesTrunks DID
Enter Immed/Wink
Exit Exit
[F4] [F4] [F2]
[F10] [F1] / [F2]
Dial trunk block no.
Type
Enter
Type trunk block no.
[F10] [F5] [F5]
DID Trunk Type
7-3