Paging (2448 System); Programming Multi-Purpose Buttons (2448 System) - AT&T Spirit Communications System User Manual

30

Paging (2448 System)

Group Page
You can page all the telephones in one group. See page 5 for a list of groups.
Press INTERCOM. Lift receiver (or press SPEAKER). Dial two-digit
Make announcement.
If you have programmed a button for group paging, press that button (see below).
NOTE: Only one person may answer a group page. All other extensions are disconnected from the
page when someone answers.
Loudspeaker Paging (For systems with optional public address system)
If there is a line button on your phone for the public address system, Press line button.
Lift receiver (or press SPEAKER). Follow the instructions provided with the public address system.
If the line is not on a button on your phone, Press INTERCOM. Lift receiver (or press
SPEAKER). Dial 8. Dial two-digit line number (01-24) of the loudspeaker. Follow the
instructions provided with the public address system. Make announcement.

Programming Multi-Purpose Buttons (2448 System)

To program a button for SpeedCall, see page 34.
To program a button for any other purpose, continue to the next page for instructions.
Paging/ Programming Multi-Purpose Buttons
group number (61-66).