Hold Return - AT&T MERLIN LEGEND Release 2.0 Programming Summary Manual

Optional Operator Features

Hold Return

Use this procedure to determine whether calls on hold are returned to the
QCC queue or remain on hold on the QCC operator console after the hold
timer has expired twice. After the hold timer expires the first time, the operator
hears an abbreviated ring as a call-on-hold reminder. If another call is
received at the same time the hold timer expires, 10 seconds are added to
the programmed operator hold timer interval. If the QCC operator does not
pick up a call by the time the hold timer expires twice, the call can be
programmed to either remain on hold or return to the QCC queue.
This option cannot be programmed for individual QCC operator positions; the
single setting applies to all QCC operator positions.
Summary: Hold Return
Programmable by
Mode
Idle Condition
Planning Form
Factory Setting
Valid Entries
Inspect
Copy Option
Console Procedure
PC Procedure
System manager
Hybrid/PBX
Not required
Form 6a, Optional Operator Features
Calls remain on hold
Remain on hold, Return to QCC queue
No
No
Operator Queued Call
the hold return
Enter
[F3] [F2] [F1]
[F10] [F5] [F5]
Hold Rtrn
Exit Exit
Select the hold return
Hold Return
Select
12-5