Simultaneous Voice And Data At Analog Voice Terminals - AT&T Merlin II Feature Module 2 Data Communications Manual

Simultaneous Voice and Data at Analog Voice Terminals

PROCEDURE FOR
ADMINISTERING THE
SIMULTANEOUS VOICE
AND DATA FEATURE
4-10 Simultaneous Voice and Data at Analog Voice Terminals
You may have assigned a second control unit station jack to one or more
analog voice terminals in your system. The second station jack provides a
path for data calls, so the person at that voice terminal can make voice and
data calls at the same time.
Check your Master Planning Form. The boxed pairs of intercom numbers
with "VDP" (voice/data pair) written next to the odd number in the pair
identify voice terminals that should have the Simultaneous Voice and Data
feature. To administer the feature, you:
Identify the station jacks for that voice terminal as a voice/data pair.
Identify the type of analog voice terminal (BIS/HFAI or membrane button)
in the voice/data pair.
Program an Auto Answer-All button on the voice terminal.
Enter administration mode and follow the appropriate steps below to
designate analog station jacks as voice/data pairs.
Your console beeps once (the MERLIN II system error tone) if
NOTE:
the station jacks you specify can't be administered for the
Simultaneous Voice and Data feature. You can't assign this feature if:
One or both jacks aren't on an analog station module
The jacks have already been assigned as a voice/voice pair
Green lights appear next to the buttons for any jacks that are assigned to
2
voice/data pairs. Touch either Auto Intercom button for the voice/data
pair until the green lights next to both buttons show the appropriate code:
Greem
lights on
Green lights off = station jacks not assigned to voice/data pair
If you haven't already identified the voice terminal as having raised plastic
3
buttons (a BIS/HFAI model) or flat membrane buttons (models without the
BIS or HFAI features) go to step 1 of "Procedure for Setting the Voice
Terminal Type," below.
Touch the appropriate button to administer another data option, or touch
4
Conference to return to the administration menu.
With a 34-Button Console
Touch Message.
1
The green light next to Message becomes steady. The other lights go off.
code #211.
2 Dial the 4-character
be
If
the system can administered, the green light next to Message remains steady and you
hear two beeps.
=
station jacks assigned to voice/data pair