The Local Host Interface Feature - AT&T Merlin II Feature Module 2 Data Communications Manual

The Local Host Interface Feature

PROCEDURE FOR ADDING
AND REMOVING THE
LOCAL HOST INTERFACE
4-8 The Local Host Interface Feature
When you assign a digital station jack to a data hunt group, the system
automatically assigns the local host interface feature to the jack. This limits
the number of call progress messages that are exchanged between digital data
endpoints when a data call is placed.
If you remove a jack from a data hunt group, you must also remove the local
host interface. Then, if you use that jack for a voice terminal with data
capabilities or for a personal terminal or computer, the user sees all the
standard call progress messages on the screen.
To remove the local host interface feature, enter
follow the appropriate procedure below.
With a MERLIN II System Display Console
D a t a
LocHost
,
Touch the Auto Intercom button for each jack whose status you want to
2
change until the green light shows the appropriate code:
Green light on = station jack has local host interface
Green light off = station jack doesn't have local host interface
Touch the appropriate button if there are other data options that you want
3
to administer, or touch Conference to return to the
With a 34-Button Console
Touch Message.
1
Dial the 4-character code #321.
2
Green lights appear next to the buttons for any jacks that have the local
3
host interface feature. Touch the Auto Intercom button for each jack
whose status you want to change until the green light shows the
appropriate code:
Green light on =
Green light off = station jack doesn't have local host interface
If you have other data options to administer, go to step 2 of the procedure
4
for the option you are administering. If not, leave administration mode by
sliding the T/P switch to the center position.
administration mode and
.
station jack doesn't have local host interface
,
More ,
M o r e
administration menu.
-