AT&T MERLIN 1030 Installation Manual page 11

Label the Jacks and Boxes
1
Find the green-on-white label sheet, which includes a telephone
number directory, line jack labels, apparatus box labels, and jack-
identifier label strips. If you have more than 24 outside lines, you need
two sheets.
2
Fill in the telephone numbers for your outside lines on the telephone
number directory in the order in which they appear at the network inter-
face or on the list provided by the local telephone company.
3
Using the telephone number directory as a guide, label the jacks with
the appropriate line jack labels.
4
Using the telephone number directory and the line jack labels as guides,
label the outside of the right door of each apparatus box with the appro-
priate apparatus box label.
5
Using the apparatus box labels as guides, label the inside of the right
door of each apparatus box with the appropriate remaining long, nar-
row label (jack numbers 1 through 8, 9 through 16, etc.).
6
Attach the telephone number directory to the outside of the right door
of the apparatus box labeled 1-8.
NOTE: Each green-on-white label sheet has enough labels for 24 outside lines.
If you have more than 24 outside lines, get a second sheet and change the
numbers on the labels to reflect the numbers of your lines above 24. For exam-
ple, if you have 30 outside lines and you are labeling your fourth apparatus box,
take the apparatus box label for 1-8 from the second label sheet, cross out 1-8,
and write in 25-30. Then label your fourth box with that label. The second
telephone number directory goes on the apparatus box labeled 25-30.
3
5
4
2
9