Integrated Peripherals - ECS 865GV-M7D Manual

Integrated Peripherals

These options display items that define the operation of peripheral components on the
system's input/output ports.
OnChip IDE Device
Onboard Device
SuperIO Device
: Move Enter: Select
F5:Previous Values
OnChip IDE Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
IDE HDD Block Mode
On-Chip Primary PCI IDe
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UltraDMA
IDE Primary Slave UltraDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UltraDMA
IDE Secondary Slave UltraDMA
ATA 66/100 Cable Msg
** On-Chip Serial ATA Setting**
SATA Mode
X
On-Chip Serial ATA
Serial ATA Part0 Mode
Serial ATA Port1 Mode
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
IDE HDD Block Mode (Enabled)
Block mode is also called block transfer, multiple commands, or multiple sector read/write.
If your IDE hard drive supports block mode (most new drives do), select Enabled for
automatic detection of the optimal number of block read/writes per sector the drive can
support.
On-Chip Primary/Secondary PCI IDE (Enabled)
The integrated peripheral controller contains an IDE interface with support for two
IDE channels. Select Enabled to activate each channel separately.
Phoenix-AwardBIOS CMOS Setup Utility
Integrated Peripherals
[Press Enter]
[Press Enter]
[Press Enter]
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults
Phoenix-AwardBIOS CMOS Setup Utility
OnChip IDE Device
[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[IDE]
[Disabled]
[Primary Master]
Primary Master
F6:Fail-Safe Defaults
Using BIOS
Item Help
Menu Level
F7:Optimized Defaults
Item Help
Menu Level
F7:Optimized Defaults
37