Pc Health Status - ECS 865GV-M7D Manual

44
•
PCI/VGA Palette Snoop (Disabled)
This item is designed to overcome problems that can be caused by some non-standard VGA
cards. This board includes a built-in VGA system that does not require palette snooping so
you must leave this item disabled.
Assign IRQ For USB (Enabled)
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity of the
selected IRQ always awakens the system.
INT Pin 1-8 Assignment (Auto)
Identifies the interrupt request (IRQ) line assigned to a device connected to the PCI
interface of your system.

PC Health Status

On motherboards that support hardware monitoring, this item lets you monitor the param-
eters for critical voltages, critical temperatures, and fan speeds.
Shutdown Temperature (Disabled)
Enables you to set the maximum temperature the system can reach before powering down.
System Component Characteristics
These items allow end users and technicians to monitor data provided by the BIOS on this
motherboard. You cannot make changes to these fields.
IRQ Resources (Press Enter): In the IRQ Resources submenu, if you assign
an IRQ to Legacy ISA, then that Interrupt Request Line is reserved for a legacy
ISA expansion card. Press <Esc> to close the IRQ Resources submenu.
In the Memory Resources submenu, use the first item Reserved Memory Base
to set the start address of the memory you want to reserve for the ISA
expansion card. Use the section item Reserved Memory Length to set the
amount of reserved memory. Press <Esc> to close the Memory Resources
submenu.
Phoenix-AwardBIOS CMOS Setup Utility
Shutdown Temperature
Vcore (V)
3.30 V
5.00 V
12.00V
1.50V
5VSB(V)
VBT (V)
Current System Temperature
Current CPU Temperature
Current System FAN Speed
Current CPU FAN Speed
Current Power FAN Speed
: Move Enter: Select
F5:Previous Values
PC Health Status
[Disabled]
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults F7:Optimized Defaults
Using BIOS
Item Help
Menu Level