Power Management Setup - ECS 865GV-M7D Manual

Power Management Setup

This option lets you control system power management. The system has various power-
saving modes including powering down the hard disk, turning off the video, suspending to
RAM, and software power down that allows the system to be automatically resumed by
certain events.
Power Management Timeouts
The power-saving modes can be controlled by timeouts. If the system is inactive for a
time, the timeouts begin counting. If the inactivity continues so that the timeout period
elapses, the system enters a power-saving mode. If any item in the list of Reload Global
Timer Events is Enabled, then any activity on that item will reset the timeout counters to
zero.
Wake Up Calls
If the system is suspended or has been powered down by software, it can be resumed by a
wake up call that is generated by incoming traffic to a modem, a LAN card, a PCI card,
or a fixed alarm on the system realtime clock
ACPI Suspend Type
Run VGABIOS if S3 Resume
Video Off Method
Video Off In Suspend
Suspend Type
MODEM Use IRQ
Suspend Mode
HDD Power Down
Soft-Off by PWR-BTTN
Resume by PCI PME
Resume by Ring
Resume by USB(S3)
Resume by Alarm
X
Date (of Month) Alarm
Time (hh:mm:ss)
X
** Reload Global Timer Events**
Primary IDE0
Primary IDE 1
: Move
F5:Previous Values
ACPI Suspend Type (S3(STR))
Use this item to define how your system suspends. In the default, S3 (STR), the suspend
mode is a suspend to RAM, i.e., the system shuts down with the exception of a refresh
current to the system memory.
Run VGABIOS if S3 Resume (Auto)
This item allows the system to initialize the VGA BIOS from S3 (Suspend to RAM) sleep
state.
Video Off Method (DPMS)
This item defines how the video is powered down to save power. This item is set to DPMS
(Display Power Management Software) by default.
Phoenix-AwardBIOS CMOS Setup Utility
Power Management Setup
[S3(STR)]
[Auto]
[DPMS]
[Yes]
[Stop Grant]
[3]
[Disabled]
[Disabled]
[Instant-Off]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
0
0 0 0
[Disabled]
[Disabled]
Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults
Using BIOS
Item Help
Menu Level
1 2
1 2 1 2
F7:Optimized Defaults
41