Table of Contents
Advertisement
38
IDE Primary/Secondary Master/Slave PIO (Auto)
Each IDE channel supports a master device and a slave device. These four items let you
assign the kind of PIO (Programmed Input/Output) was used by the IDE devices. Choose
Auto to let the system auto detect which PIO mode is best, or select a PIO mode from 0-
4.
IDE Primary/Secondary Master/Slave UDMA (Auto)
Each IDE channel supports a master device and a slave device. This motherboard supports
UltraDMA technology, which provides faster access to IDE devices.
If you install a device that supports UltraDMA, change the appropriate item on this list to
Auto. You may have to install the UltraDMA driver supplied with this motherboard in order
to use an UltraDMA device.
ATA66/100 Cable Msg (Enabled)
This item enables or disables the display of the ATA 66/100 Cable MSG.
•
On-chip Serial ATA (Disabled)
Enables and disables the built-in on-chip serial ATA.
Serial ATA Port0/1 Mode (Primary Master)
Use this item to select the SATA0 master or SATA1 master.
Press <Esc> to return to the Integrated Peripherals screen.
Onboard Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
USB Controller (Enabled)
Enable this item if you plan to use the Universal Serial Bus ports on this motherboard.
USB 2.0 Controller (Enabled)
Enable this item if want to use the USB 2.0 controller.
SATA Mode (IDE): Use this item to select the mode of the Serial ATA.
Phoenix-AwardBIOS CMOS Setup Utility
Onboard Device
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
Onboard LAN Device
Onboard LAN Boot ROM
Onboard 1394 Device
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values
F6:Fail-Safe Defaults
[Enabled]
Item Help
[Enabled]
[Enabled]
[Enabled]
Menu Level
[Auto]
[Enabled]
[Disabled]
[Enabled]
F7:Optimized Defaults
Using BIOS
Advertisement
Table of Contents
