Cpu Installation Procedure - ECS 865GV-M7D Manual

14

CPU Installation Procedure

The following illustration shows CPU installation components.
A. Unload the cap
B. Open the load plate
C. Install the CPU on the socket
D. Close the load plate
E. Apply thermal grease on top of the CPU.
F. Fasten the cooling fan supporting base onto
G. Make sure the CPU fan is plugged to the
· Use thumb & forefinger to hold the
lifting tab of the cap.
· Lift the cap up and remove the cap
completely from the socket.
· Use thumb & forefinger to hold the
hook of the lever, pushing down and pulling
aside unlock it.
· Lift up the lever.
· Use thumb to open the load plate. Be
careful not to touch the contacts.
· Orientate CPU package to the socket.
Make sure you match triangle marker
to pin 1 location.
· Slightly push down the load plate onto the
tongue side, and hook the lever.
· CPU is locked completely.
the CPU socket on the motherboard.
CPU fan connector. Please refer to the CPU
cooling fan user's manual for more detail
installation procedure.
To achieve better airflow rates and heat dissipation, we suggest that you use
a high quality fan with 3800 rpm at least. CPU fan and heatsink installa-
tion procedures may vary with the type of CPU fan/heatsink supplied. The
form and size of fan/heatsink may also vary.
Installing the Motherboard