Table of Contents
Advertisement
•
Vcore
•
5VSB (V)
•
VBT (V)
•
CPU Vcore
•
Current System Temperature
•
Current CPU Temperature
•
Current System FAN Speed
•
Current CPU FAN Speed
•
Current Power FAN Speed
Frequency Control
This item enables you to set the clock speed and system bus for your system. The clock
speed and system bus are determined by the kind of processor you have installed in your
system.
CPU Clock Ratio
Auto Detect PCI Clk
Spread Spectrum
Async AGP/PCI Clk
CPU Clock
: Move
F5:Previous Values
CPU Clock Ratio (8X)
Enables you to set the CPU clock. The CPU clock ratio times the CPU Host/PCI Clock
should equal the core speed of the installed processor.
Example:
Installed CPU Clock Speed
Auto Detect PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM and PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Async AGP/PCI CLK (Disabled)
This item allows you to select the fixed clock to generate the output to AGP/PCI frequency.
CPU Clock (100)
Use the CPU Host Clock to set the frontside bus frequency for the installed processor
(usually 200 MHz, 133 MHz or 100MHz).
Phoenix-AwardBIOS CMOS Setup Utility
Frequency Control
[8X]
[Enabled]
[Enabled]
[Disabled]
[100]
Enter: Select
+/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F6:Fail-Safe Defaults
CPU Clock Ratio
CPU Frequency
Using BIOS
Item Help
Menu Level
F7:Optimized Defaults
8
x 100
800 MHz
45
Advertisement
Table of Contents
