Received Channel Commands; Sysex Specification - E-Mu Xtreme Lead-1 Manual

Received Channel
Commands
SysEx Specification
Channels number (n) = 0-15. Message bytes are represented in hex. All
other numbers are decimal. Running Status is supported.
Command
Note Off
Note On
Key Aftertouch
Program Change
Channel Aftertouch
Pitch Bend
Real-time Controller
Footswitch
Volume
Pan
All Sound Off
Reset All Controllers
All Notes Off
Omni Mode Off*
Omni Mode On*
Mono Mode On (Poly Off)*
Poly Mode On (Mono Off)*
Bank Select MSB
Bank Select LSB
* Special Notes:
• From Omni Mode ...........Omni Off turns Poly On.
• From Poly Mode .............Omni On turns Omni On; Mono On turns
• From Mono Mode...........Mono Off turns Poly On; Omni On turns
• From Multi Mode ...........Omni On turns Omni On; Omni Off or Mono
• All other changes have no effect.
XL-1 contains an extensive set of MIDI SysEx commands. (Virtually every
parameter is controllable via SysEx.) Because of the size and technical nature
of the System Exclusive specification, it is beyond the scope of this manual.
The complete SysEx specification for XL-1 is available on the official E-mu
Systems, Inc. web site: www.emu.com
Message Comments
8n kk vv
9n kk vv velocity 0 = note off
An kk vv kk = 0-127 vv = 0-127
Cn vv 0-127
Dn vv 0-127
En ll mm l = lsb, m = msb
Bn cc vv cc = 00-31, 64-95
Bn cc vv cc = 64-79, vv
Bn 07 vv 0-127
Bn 0A vv 0=left, 127=right, 64=center
Bn 78 00 turns all sound off
Bn 79 00 ignored in omni mode
Bn 7B 00 ignored in omni mode
Bn 7C 00 forces all notes & controls off
Bn 7D 00 forces all notes & controls off
Bn 7E 00 forces all notes & controls off
Bn 7F 00 forces all notes & controls off
Bn 00 bb bb = bank MSB (see page 118)
Bn 20 bb bb = bank LSB (see page 118)
Mono On.
Omni On.
Off turns Poly On; Mono On turns Mono On.
Xtreme Lead-1 Operation Manual 229
Appendix
MIDI
64 = on