Quick Edit; Deep Edit Mode - E-Mu Xtreme Lead-1 Manual

Quick Edit

_ _ _ _
Quick-Edit mode must
be enabled in the Master menu.

Deep Edit Mode

36 E-MU Systems
This mode uses the Controller knobs to "Quick-Edit" the currently selected
preset without having to enter the Preset Edit menu. This mode is only
active when on the Preset Select screen and when "Quick-Edit" is enabled in
the Master menu (see "Knob Preset Quick-Edit" on page 85).
Initial controller values can be stored in every preset. When you move a
knob with Quick-Edit enabled, the Initial Controller Value is updated with
the knob's new value. The knob's LED lights indicating that the preset value
has been changed. The three Control Rows' MIDI A-L values are stored in
the corresponding Initial Controller Amount parameter in the Edit menu (see
"Initial Controller Amount" on page 160). The Save/Copy button LED
illuminates to remind you that the preset has been edited. "Quick-Edits"
made to a preset are lost if you select another preset before saving them.
To Quick-Edit a Preset
Use the Control Knobs to change the sound of the current preset as
1.
desired.
Press the Save/Copy button. The display reads, "Save Preset to."
2.
Press the right cursor button to select the bottom row.
3.
Optional: Select a new preset location if you don't want to overwrite
4.
the current preset, or if the current preset is a ROM preset.
Press the Enter button to save the preset.
5.
When in the Master, or Edit menus, you can use the Controller Knobs to
edit parameters. Using the Controller Knobs is a faster method for entering
data, but the Data Entry Control offers finer precision.
To Enable Deep Edit Mode:
Press the Master button and use the Data Entry Control to advance to
1.
the "Knobs Deep Edit" screen as shown in the following illustration.
KNOBS DEEP EDIT
disabled
Press either Cursor key to move the cursor to the bottom line in the
2.
display.
Use the Data Entry Control to change the value to "enabled."
3.
Press the Master menu button to exit the Master menu.
4.
When you enter any of the Edit menus:
The four Controller Knobs are used for editing.
1.
All the Controller LEDs are off.
2.
All the Control Row LEDS are off.
3.
Basic Operations
Front Panel Controller Modes