Copy Patchcords - E-Mu Xtreme Lead-1 Manual

Copy
PatchCords
To Copy a Layer
Select the Preset and Layer you want to copy information into.
1.
Press the Save/Copy menu button.
2.
Move the cursor to the bottom line on the display.
3.
Select the preset location using the Data Entry Control, of the preset
4.
containing the information you want to copy into the current preset.
Move the cursor to the top line in the display.
5.
Select the layer of the source preset in the first field on the right.
6.
Select the destination layer in the second field.
7.
Press the Enter/Home button.
8.
The Copy PatchCord command lets you copy the patchcord settings from
one layer of the preset location into the current layer of the current preset
location. The preset information in the source location (the preset location
from which you want to copy) is not deleted from the original location, just
copied to the destination location.
COPY CORDS
1
020 Source Preset
To Copy a PatchCord
Select the Preset and Layer you want to copy information into.
1.
Press the Save/Copy menu button.
2.
Move the cursor to the bottom line on the display.
3.
Select the preset location using the Data Entry Control, of the preset
4.
containing the information you want to copy into the current preset.
Move the cursor to the top line in the display.
5.
Select the layer of the source preset in the first field on the right.
6.
Select the destination layer in the second field.
7.
Press the Enter/Home button.
8.
Copying Information
L1 -> L4
User
Xtreme Lead-1 Operation Manual 193
Save/Copy Menu