Midi Parameters; Midi Mode; Midi Sysex Id - E-Mu Xtreme Lead-1 Manual

MIDI
Parameters

MIDI Mode

MIDI SysEx ID

_ _ _ _
WARNING: When
transferring SysEx data from
one Xtreme Lead to another,
the ID numbers of both units
must be the same.
MIDI parameters control how the Xtreme Lead sends and receives MIDI
data.
MIDI Mode selects one of the three MIDI modes: Omni, Poly or Multi
mode.
MIDI MODE
omni
The MIDI Mode Change parameter specifies whether mode changes made
through an external MIDI controller are accepted or ignored.
The MIDI modes are as follows:
Omni
Responds to note information on all MIDI channels and plays the preset
currently displayed in the main screen.
Poly
Responds only to note information received on the currently selected MIDI
channel (on the preset selection screen) and plays that channel's associated
preset.
Multi
Responds to data on any combination of MIDI channels and plays the
specific preset associated with each of the MIDI channels. You must select
multi mode for multitimbral operation.
This page defines the MIDI system exclusive (SysEx) device ID number. The
SysEx ID lets an external programming unit to distinguish between
multiple Xtreme Lead units connected to the same preset editor. In this case
each unit must have a unique SysEx ID number.
MIDI SYSEX ID
000
Master Menu

MIDI Parameters

CHANGE
ignored
Xtreme Lead-1 Operation Manual 81