Linking Presets - E-Mu Xtreme Lead-1 Manual

Linking
Presets
O O O O
See "Preset Links" on
page 163 for more information.
Using the Link pages in the Edit menu is a quick and easy way to create new
sounds. Use the Links to "layer" presets and to "split" a keyboard into
sections containing different sounds.
To Layer Two Presets
Select the first preset you want to layer.
1.
Press the Edit button. Use the Data Entry Control to move through the
2.
screens until you find either the "LINK 1" or "LINK 2" screen shown
below.
LINK 1
off
Move the cursor to the second line of the display. Select the preset you
3.
want to link with the preset you selected in step 1. Play the keyboard as
you scroll through the various presets to hear the results.
If you want the link to be a permanent part of the preset, be sure to save
4.
the preset. Otherwise, simply change the preset to erase your work.
To Create a Split Keyboard Using Links
Follow steps 1 through 4 above.
1.
Press Enter and use the Data Entry Control to advance to the next page.
2.
LINK 1
RANGE
Set the keyboard range of the linked preset as desired.
3.
Press Enter and use the Data Entry Control to go to the Key Range page
4.
(It's one of the first Edit menu pages).
L1 KEY:LO
Set the range of the original preset so it fills the remaining keyboard
5.
area. Save the preset.
PRESET
KEY
C-2 B4
FADE HIGH
C5 000 G8
Xtreme Lead-1 Operation Manual 175
Programming Tutorial

Linking Presets

XLEAD
VEL
000 127
FADE
000