Talking Caller Id; Caller Id On Call Waiting - ClearSounds A600 Operating Manual

█ Talking Caller ID Setting
Your ClearSounds
Talking Caller ID Mode set to OFF and will announce the caller's
number between rings. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
press the Select soft key.
4. Press up
deactivate the audible tone function and then press the
Save soft key.

Caller ID on Call Waiting

█
When you subscribe to Call Waiting Caller ID service from
your local phone provider, the phone will display the Caller ID
information of the second call while you are on the first call.
1. When you are on existing call, a tone will emit, and the
Caller ID displays the incoming caller's information.
2. Press the Flash soft key to put the current call on hold
and answer the second caller.
3. When you have finished with the second call, press the
Flash key to resume your conversation with the first
caller.
A600 comes from the factory preset for
®
or down
or down
or down
42 – ENGLISH
to scroll to HS Settings and
to scroll to Talk CID and then
to select On or Off to activate/