Handset Name; Handset Reset - ClearSounds A600 Operating Manual

PHONE HANDSET SETTINGS
Reminder: Press the Back soft key from any menu to return
to the previous screen. To return to the main screen, press
. Otherwise, after 1 minute, the phone will automatically
return to the main screen from any menu if no key is pressed.
█

Handset Name

This feature allows you to give each registered handset a name
in order to easily recognize each handset if you have more than
one registered to the base. To set the handset name:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
press the Select soft key.
4. Enter the handset name (up to 12 characters) by
using the keypad (see page 58 for the character map
and instructions) and then press the Save soft key to
confirm and exit. The handset name will be displayed
above your handset number in standby mode.
NOTE: If you make a mistake while entering the name, use the
Erase soft key to correct it. Each time you press this key, the
last character is deleted.

Handset Reset

█
This function allows you to reset the handset settings for Alarm,
Audio Setup, Ring Setup, Tone Setup, Language, HS Name,
Auto Answer and Date & Time to the initial factory settings. To
reset the handset:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
or down
or down to scroll to HS Name and then
or down
30 – ENGLISH
to scroll to HS Settings and
to scroll to HS Settings and