Installation Steps - ClearSounds A600 Operating Manual

█

INSTALLATION STEPS

Installation of your ClearSounds
Cordless Phone with Full ClearDigital™ Power is easy. There
are some basic steps you need to take when you set-up your
phone for the first time.
If, at any time, you have questions about your phone after
reading this manual, please contact the ClearSounds
Customer Service Department at 1-800-965-9043.
1. PARTS CHECKLIST
Check the contents of the box - The A600 should contain:
Phone base
AC Adapter
2. PHONE INSTALLATION
The phone should be located in an area where it is easy to see
the visual display and lighted ringer. Choose an area near a
phone wall jack (RJ11C) and power outlet. The phone may be
placed on a shelf or table or may be fixed to the wall using the
wall mounting bracket. To avoid potential interference, the
phone should not be located near electronic equipment, such
as personal computers, television or microwave ovens.
Begin by removing the clear plastic Caller ID protective tab.
This film tab is only for display and to protect your Caller ID
display during shipping.
Cordless Handset
Carrying Clip
13 – ENGLISH
® A600 DECT 6.0 Amplified
Batteries
User Manual
®
Phone
Line Cords
Bracket