ClearSounds A600 Operating Manual page 50

4. Record your announcement after the tone. Recording will
stop automatically after 3 minutes or you can confirm
and end the recording by pressing the OK soft key.
During the recording, the LCD will show "Recording...".
5. The announcement will be played back immediately. If
you do not like your message, record your announcement
again or restore it to the default one.
Record Announce2:
The default announcement is "Hello, your call cannot be
taken at the moment. Please call back later.". To change
the Announcement:
1. Press the TAM soft key to display the TAM main menu
list.
2. Press the Select soft key to select Announce and then
press down
Select soft key.
3. Press down
Select soft key.
4. Record your announcement after the tone. Recording will
stop automatically after 3 minutes or you can confirm
and end the recording by pressing the OK soft key.
During the recording, the LCD will show "Recording...".
5. The announcement will be played back immediately. If
you do not like your message, record your announcement
again or restore it to the default one.
Using the Base to Record Announcement(s)
Press and hold
you to record. Record your announcement after the tone.
Recording will stop automatically after 3 minutes or you can
confirm and end the recording by pressing
The announcement will be played back immediately. If you
do not like your message, record your announcement again or
restore it to the default one.
to select Announce2 and then press the
to scroll to Record and then press the
or on the base until the system directs
50 – ENGLISH
.