Talking Caller Id - ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 Operating Manual

█ Storing CID Records
Your telephone's Caller ID memory stores the data for the 30
most recent calls received. When the 31
oldest Caller ID record (1
You may review the stored information at any time. Calls
received since your last review show as NEW in the display.
Calls that have not been previously reviewed but were received
from the same number more than once show as REPT in the
display.
█ Talking Caller ID Setting
Your ClearSounds® CSC1000 comes from the factory preset
for Talking Caller ID Mode set to ON and will announce the
caller's number between rings. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press ▼ to move to Set Talk and then press the Select
soft key.
3. Press ▼ to move to CID TALKING and then press the
Select soft key.
4. Press ▲ or ▼ to select ON/OFF to activate/deactivate the
dialing function and then press the Select soft key to
confirm.
5. To exit, press the Back soft key to return to the previous
screen and then press the Exit soft key to return to the
main screen. Otherwise, after 1 minute, the display
will automatically return to the main screen.
Note: If you have stored a phone number in the phonebook
and recorded the corresponding name, when an incoming
call with this number comes in, the phone will announce
the name associated with this number. See page 47 for
instructions on recording a phonebook name.
call) is automatically deleted.
st
35 – ENGLISH
call is received, the
st