ClearSounds A600 Operating Manual page 33

Speakerphone Volume
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press down
the Select soft key.
4. Press the Select soft key to select Speakerphone V.
5. The display shows the current setting. Press up
down
– Volume 5) and then press the Save soft key.
NOTE: If you adjust the earpiece or speakerphone volume
while on a call, the phone will remain at the adjusted level
after you hang up.
█ Talking Setting
Caller ID
Your ClearSounds
Talking Caller ID Mode set to OFF and will announce the caller's
number between rings. To change this setting:
1. Press the Menu soft key to display the main menu list.
2. Press up
then press the Select soft key.
3. Press up
press the Select soft key.
4. Press up
deactivate the Talking Caller ID function and then press
the Save soft key.
or down
to select Audio Setup and then press
to select the desired volume level (Volume 1
A600 comes from the factory preset for
®
or down
or down
or down
33 – ENGLISH
to scroll to HS Settings and
to scroll to HS Settings and
to scroll to Talk CID and then
to select On or Off to activate/
or