Call Back (Redial) From The Caller Id Memory - ClearSounds Talk500 User Manual

View the Caller ID Memory
Press to review more recent calls. The CALL# will decrease.
After you view the most recent data in memory, the display will show END OF LIST.
Press to review older calls. The CALL# will increase.
After you view the oldest data in memory, the display will show END OF LIST.
If the data in memory is being reviewed for the first time, the NEW icon will be lit.
The NEW CALL LED will turn off if you review the data.
If no key is pressed within 20 seconds, the display will display the total call
counter, new call counter, current time and date.
Erase The Caller ID Memory
1. Select the required Caller ID memory location by using the
2. To delete single memory, press DELETE button once. The display will show
the DELETE?. Press DELETE button for 2 seconds. The data for that call
will be erased, and the CALL# and Caller ID information will be updated.
-OR-
To delete all entire memory, press and hold DELETE button until the display
shows DELETE ALL?. Press DELETE for 2 seconds until NO CALLS
appears on the display. Both the total call and new call counters will become
zero, and the current time and date will be displayed.

Call Back (Redial) From The Caller ID Memory

With the handset hung up on the base.
1. Select the required Caller ID memory location by pressing
2. Press DIAL button, the speakerphone will on automatically and dial the
selected number.
-OR-
Lift the handset or press the
location by pressing
Note: If the Caller ID number is 10 digits, press DIAL button once, the unit will
insert "1" before the Caller ID number automatically. You can press
to select insert "1" or not. Press DIAL again, the speakerphone will turn on
automatically and dial the display number.
button, select the required Caller ID memory
or , then press DIAL button.
14 – ENGLISH
or button.
or .
button