Installation Steps - ClearSounds AMPLIFIED FREEDOM PHONE WITH FULL CLEARDIGITAL POWER CSC1000 Operating Manual

█ INSTALLATION STEPS

Installation of your ClearSounds® CSC1000 Amplified
Freedom Phone™ with Full ClearDigital™ Power is easy.
There are some basic steps you need to take when you set-up
your phone for the first time.
1. Check parts list
2. Pre-select auxiliary features:
a. AMPLIFICATION: Amplify Override ON / OFF
b. RINGER: Strobe & Shaker / Only Shaker / Only
3. Installation
If at any time you have questions about your telephone
after reading this manual, please contact our ClearSounds®
Customer Service Department at 1-800-965-9043.
1. PARTS CHECKLIST
Check the contents of the box - The CSC1000 should contain:
1. Handset and handset cord
2. Phone base
3. Telephone line cords (one 6 inch and one 6 ft cord)
4. AC Adapter (7.5V/500mA)
5. Wall plate adapter
6. User's Manual
7. Photo Template
2. PRE-SELECT AUXILIARY FEATURES: If you plan on mounting
your phone on the wall, you may want to consider setting up
the Amplification Override Switch (page 15) and Ringer Switch
(pages 16-17).
3. PHONE INSTALLATION
The phone should be located in an area where it is easy to see
the visual display and lighted ringer. Choose an area near a
telephone wall jack (RJ11C) and power outlet. The telephone
may be placed on a shelf or table or may be fixed to the wall
using the wall plate adapter (mounting bracket). To avoid
Strobe
11 – ENGLISH