Programmable Mode; Copy - Aube Technologies EConnect Wireless Thermostat Kit TA7210 System Installation Manual

Installation Guide

Programmable mode

The thermostat is factory-set as a 7-day programmable thermostat. To set it as a non-programmable
thermostat, proceed as follows:
# Display
1)
2)

Copy

Use this function to copy the configuration settings, the schedule settings or both to other EConnect™
wireless thermostats in your house. This function is available only if the thermostat is connected either to a
remote control or outdoor sensor. The settings are copied to other thermostats connected to the remote
control or outdoor sensor.
# Display
1)
2)
3)
Button
Button
14
Step
From the installer's setup
menu, press to select
Horaire (schedule) and
press Ok.
Press or to select
Non and press Ok.
Step
From the installer's setup
menu, press as needed
to select Copie and press
Ok.
Press or to select
Horaire (schedule),
Configuration or both.
Press Ok.
Patientez (wait) may
appear for several
minutes. When SUCC
(success) appears, press
Sortir (exit) to return to
home menu.