Link Additional Eim To Wireless Network (Optional) - Aube Technologies EConnect Wireless Thermostat Kit TA7210 System Installation Manual

Link additional EIM to wireless network (optional)

Perform steps 1 to 6 for each additional EIM. You can link a maximum of 8 EIMs to
the wireless network.
1) If the green light on the previously-linked EIM is flashing, press its Connect button. The
green light will become steady.
2) Press the Connect button on the next EIM you wish to link and wait for its green
flashing light.
Skip steps 3 and 4 if the thermostat is displaying the Connexion menu (as
shown in step 5).
# Display
3)
4)
5)
6)
Button
9
EConnect™ TA7210
Step
Press and hold the right
center button for 5 secs.
From the installer's setup
menu, press to select
Connexion (link) and
press Ok.
Press to select
Connecter autre (connect
more) and press Ok.
SUCC (success) confirms
the connection is
successful. Press Sortir
(exit) once and go back to
step 1 to link another EIM
or press Sortir (exit) 3
times to return to home
screen.