Owner's Guide
Running the schedule (Automatic mode)
In Automatic mode, the thermostat follows the programmed schedule (see page 14). To
place the thermostat in this mode, press Mode/Ret until
Temporary override of schedule
If you modify the setpoint temperature (by pressing the
thermostat is in Automatic mode, the new temperature will be used until the beginning of the
next period.
flashes during the temporary override. You can cancel the temporary
override by pressing Mode/Ret.
Permanent override of schedule (Manual mode)
To place the thermostat in Manual mode, press Mode/Ret to display
mode, the thermostat does not follow the programmed schedule. Press the
button to set the temperature.
is displayed.
,
16
or
button) when the
on the screen. In this
,
or