Anti-Freeze; To Turn Off The Anti-Freeze Protection; System Test - Aube Technologies EConnect Wireless Thermostat Kit TA7210 System Installation Manual

Installation Guide

Anti-freeze

When this function is on, the EIM will maintain the room temperature at 13°C (55°F) if it loses
communication with the thermostat or if the thermostat sensor is defective.
Leave the protection on unless the EIM is installed in a junction box in a separate room from
the heater.
To turn off the Anti-freeze protection, proceed as follows:
# Display
1)
2)

System test

1) From the Home screen, press
ambient temperature by at least 2°. Press Temporaire (temporary).
2) Wait for Chauffe (heat) to display on the thermostat.
3) Verify if the heater becomes hot.
4) Press Annuler (cancel) to return the thermostat to its previous mode.
Button
until the setpoint temperature is above the room
18
Step
From the installer's setup
menu, press as needed to
select Hors-Gel (anti-freeze)
and press Ok.
Press or to select Non
(no). Press Ok.