To Make A 2-Wire Resistance Measurement; To Make A 4-Wire Resistance Measurement - Agilent Technologies L34410A User Manual

1 Quick Start

To Make a 2-Wire Resistance Measurement

Press
• Ranges: 100Ω, 1 kΩ, 10 kΩ , 100 kΩ , 1 MΩ, 10 MΩ, 100 MΩ , 1 GΩ
• Configurable parameters: INTEGRATION, RANGE, OFFSET COMP, AUTO ZERO, NULL,
To null–out the test lead resistance:
1 Connect one end of the test leads at the meter, and short the probe ends
2 Press null.
3 Connect the probe ends to the test circuit, and measure the corrected

To Make a 4-wire Resistance Measurement

Press
• Ranges: 100Ω, 1 kΩ, 10 kΩ , 100 kΩ , 1 MΩ, 10 MΩ, 100 MΩ , 1 GΩ
• Configurable parameters: INTEGRATION, RANGE, OFFSET COMP, NULL, and NULL
All 4-wire resistance measurements are made with auto-zero on.
20
to select the 2-wire resistance function.
and NULL VALUE
Connect test leads as shown:
together.
resistance value.
VALUE
Connect test leads as shown:
to select the 4-wire resistance function.
Resistance
Resistance
34410A/11A/L4411A User's Guide