Reading The Error Queue; Nispom Memory Sanitization; Calibration - Agilent Technologies L34410A User Manual

2 Features and Functions

Reading the Error Queue

You can read the error queue either from the front panel, or from the remote
interface.
• Front Panel Operation: Press
• Remote Interface Operation: The following command reads and clears one

NISPOM Memory Sanitization

You can sanitize all user-accessible instrument memory either from the front
panel, or from the remote interface. This complies with the requirements in
chapter 8 of the National Instrument Security Program Operating Manual
(NISPOM).
• Front Panel Operation: Press
• Remote Interface Operation: The following command sanitizes all

Calibration

Only service–qualified personnel should calibrate the multimeter. Improper
use of the front–panel CALIBRATION procedure in the UTILITY menu could result in
damage to the multimeter. The multimeter is secured with a calibration
security code at the factory. Refer to the Agilent 34410A/11A/L4411A Service
Guide for calibration procedures.
84
UTILITY MENU > SCPI ERRORS
Scroll through the errors using the navigation keypad. Press
all errors from the queue.
error from the error queue in first–in–first–out order.
SYSTem:ERRor[:NEXT]?
Refer to the Agilent 34410A/11A/L4411A Programmer's Reference Help for
a complete description and syntax for this command.
UTILITY MENU > NISPOM
Select "YES" to sanitize all user-accessible memory.
user-accessible instrument memory.
SYSTem:SECurity:IMMediate
Refer to the Agilent 34410A/11A/L4411A Programmer's Reference Help for
a complete description and syntax for this command.
34410A/11A/L4411A User's Guide
to clear