Upgrade The Module Firmware - NETGEAR MVBR1210C User Manual

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
2. Log in to the router. Type http://www.routerlogin.net in the address field of your Internet
browser. Enter admin for the user name and your password (or the default, password
3. From the main menu, under Maintenance, select Router Upgrade to display this screen.
4. Click Browse to locate the binary (.bin or .img) upgrade file.
5. Click Upload.
WARNING:
When uploading firmware to the router, do not interrupt the web
browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it might corrupt the firmware,
causing router to be unworkable and inaccessible. When the
upload is complete, your router will automatically restart. The
upgrade process typically takes about 1 minute. In some cases,
you might need to clear the configuration and reconfigure the
router after upgrading.

Upgrade the Module Firmware

Note: This section deals with upgrading the mobile broadband modem
firmware. For information about upgrading the router firmware, see
Upgrade the Router Firmware
The module firmware is stored in flash memory and can be upgraded as new module
firmware is released by NETGEAR or the module vendor. Upgrade files can be downloaded
from the NETGEAR or module vendor website. If the upgrade file is compressed (a .zip or
.exe file), you need to first extract the binary (.cwe) file before uploading it to the router.
NETGEAR recommends that you back up your configuration before doing a module firmware
upgrade. After the upgrade is complete, you might need to restore your configuration
settings.

To upgrade the module firmware:
1. Download and unzip the new module firmware file from NETGEAR or the module
vendor.
on page 72.
Managing Your Network
73
.
)