Upgrade The Router Firmware - NETGEAR AC1200 JR6100 User Manual

Upgrade the Router Firmware

The router firmware (routing software) is stored in flash memory. You can upgrade the
firmware from the Administration menu you access from the ADVANCED tab. You might see
a message at the top of the genie screens when new firmware is available for your product.
You can use the Check button on the Firmware Upgrade screen to check if new firmware is
available, and to update your product.

To check for new firmware and update your router:
1. Select ADVANCED > Administration > Firmware Upgrade.
2. Click the Check button.
The router finds new firmware information if any is available.
3. Click the Yes button.
The router locates the firmware you downloaded (the file ends in .img) and begins the
upgrade.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the
upgrade. For example, do not close the browser, click a link, or
load a new page. Do not turn off the router.
When the upload is complete, your router restarts. The upgrade process typically takes
about one minute. Read the new firmware release notes to determine whether you need
to reconfigure the router after upgrading.
AC1200 WiFi Router JR6100
Administration
75
Click
Check