Use Netgear Genie After Installation; Upgrade The Firmware - NETGEAR N600 DGND3800B User Manual

N600 Wireless Dual Band Gigabit VDSL2 Modem Router DGND3800B

Use NETGEAR genie after Installation

When you first set up your modem router, NETGEAR genie automatically starts when you
launch an Internet browser on a computer that is connected to the modem router. If you want
to view or change settings for the modem router, you can use genie again.
To use NETGEAR genie again after installation:

1. Launch your browser from a computer or wireless device that is connected to the
modem router.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
The login window displays:
3. Enter admin for the modem router user name and password for the modem router
password, both in lowercase letters.
Note: The modem router user name and password are different from the user
name and password for logging in to your Internet connection. For more
information, see

Upgrade the Firmware

When you set up your modem router and are connected to the Internet, the modem router
automatically checks for you to see if newer firmware is available. If it is, a message is
displayed on the top of the screen. For more information, see
Firmware on page 89.
Click the message when it shows up, and click Yes to upgrade the modem router with the
latest firmware. After the upgrade, the modem router restarts.
CAUTION:
Do not try to go online, turn off the modem router, shut down the computer,
or do anything else to the modem router until the modem router finishes
restarting and the Power LED has stopped blinking for several seconds.
Types of Logins and Access
Access the Modem Router
21
on page 19.
Update the Modem Router