Create A Network Folder - NETGEAR MVBR1210C User Manual

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C
Table 9. USB Storage (Advanced Settings) (continued)
Fields
Available Share Name
Network Folders
Read and Write
Access
Folder Name
Volume name
Total/Free
Space

Create a Network Folder


To create a network folder:
1. From the USB Storage (Advanced Settings) screen, click the Create Network Folder
button to open the Create Network Folder screen:
2. Create a folder.
• You can specify the folder's share name and change read access and write access from
All-no password to admin.
• The password for admin is the same one that is used to log in to the router main
menu. By default it is password.
3. Click Apply so that your changes take effect.
Description
• You can click the name shown, or you can type it into the address field of
your web browser.
• If Not Shared is shown, then the default share has been deleted, and no
other share for the root folder exists. Click the link to change this setting.
Shows the permissions and access controls on the network folder.
• All-no password allows all users to access the network folder.
• admin prompts you to enter the same password that you use to log in to
the router main menu.
Full path of the used by the network folder.
Volume name from the storage device (either USB drive or HDD).
The current utilization of the storage device.
USB Storage
47