Usb Printer Control - NETGEAR MVBR1210C User Manual

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

USB Printer Control

The USB Control Center utility allows you to control a shared USB device from your computer
that is connected to the USB port on your router. The utility allows you to control a printer.
The utility has to be installed on each computer on your network from which you want to
control the device. You can download this utility at
www.netgear.com/landing/en-us/readyshare.aspx.
When you launch the USB Control Center utility, a screen similar to the following displays:
This is the main screen, which shows a device icon, the description for this USB device, and
its status.
Available. The device is available from the computer that you are using.
Waiting to Connect. You need to connect to this device from the computer that you are
using. If this is the first time you are connecting, you might be prompted to install the device
driver.
The following menu selections are available:
• System. Exit the utility.
• Tools. Access the Control Center Configuration to set up your shared USB device. See
the following section,
• About. View details about the USB Control Center software.
Control Center Configuration.
USB Printer
52