NETGEAR MVBR1210C User Manual page 79

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

To restrict access based on MAC addresses:
1. From the main menu, under Advanced, select Wireless Settings. Click Set Up Access
List to display the Wireless Card Access List screen.
2. Adjust the list as needed for your network. You can add devices to the Trusted Wireless
Stations list. Click Add to display the following screen:
3. You can add devices to the list using either of the following methods:
• If the computer is in the Available Wireless Cards table, select its radio button to
capture its MAC address.
• Use the Wireless Card Entry fields to enter the MAC address of the device to be
added. The MAC address can usually be found on the bottom of the wireless device.
• If no device name displays when you enter the MAC address, you can type a
descriptive name for the computer that you are adding.
4. Click Apply to save these settings. Now, only devices on this list will be allowed to wirelessly
connect to the router.
Advanced
79