Table of Contents
Advertisement
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label
of your product and use it to register your product at
www.NETGEAR.com/register.
Registration is required before you
can use our telephone support service. Registration through our
website is strongly recommended.
Go to
http://support.netgear.com
for product updates and web
support.
GPL might be included in this product; to view the GPL license
agreement, go to
ftp://downloads.netgear.com/files/GPLnotice.pdf.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
April 2012
MoCA Adapter MC1001 v2
Installation Guide
Package Contents
The box should contain the following items. If any items are
incorrect, missing, or damaged, contact your NETGEAR dealer.
MoCA Adapter MCA1001 v2
Ethernet cable
Power adapter
Advertisement
Table of Contents
Related Manuals for NETGEAR MCA1001 V2
Summary of Contents for NETGEAR MCA1001 V2
-
Page 1: Technical Support
Thank you for selecting NETGEAR products. The box should contain the following items. If any items are incorrect, missing, or damaged, contact your NETGEAR dealer. After installing your device, locate the serial number on the label of your product and use it to register your product at MoCA Adapter MC1001 v2 www.NETGEAR.com/register. - Page 2 Compliance Home Network Declarations of Conformity In this example, the same For complete DoC please visit the NETGEAR EU Declarations of company provides both the Conformity website at cable TV and cable Internet http://support.netgear.com/app/answers/detail/a_id/11621/. For GNU General Public License (GPL) related information, please visit service.
-
Page 3: Table Of Contents
Installation ......... 2 Cable TV and Cable Modem Internet . -
Page 4: Installation
Installation You need at least two MoCA adapters to set up MoCA communication. NETGEAR recommends that you set up the MoCA adapter for your Internet connection first. Cable TV and Cable Modem Internet MoCA Adapter MCA1001 v2... - Page 5 To connect a MoCA adapter to your router and your indoor cable Internet outlet: Connect the MoCA adapter to your router. Use the provided Ethernet cable to connect the MoCA adapter to a LAN port on your router. Connect the MoCA adapter to the cable jack. a.
-
Page 6: Cable Modem Gateway
Cable Modem Gateway MoCA Adapter MCA1001 v2 Cable modem gateway... - Page 7 To connect a MoCA adapter to your cable modem gateway: Connect the MoCA adapter to the indoor cable Internet outlet. a. Disconnect your cable modem gateway from the coax cable Internet outlet, but leave one end of the coax cable connected to the wall outlet.
-
Page 8: Connect The Second Moca Adapter To A Tv
Connect the Second MoCA Adapter to a TV MoCA Adapter MCA1001 v2... - Page 9 To connect a MoCA adapter to a TV (in a different room): Connect the MoCA adapter to the cable jack. a. Locate the coax cable that connects your TV to the cable jack in the wall outlet. b. Disconnect it from the TV, but leave the other end of the cable connected to the cable jack.
-
Page 10: Use The Leds To Verify Network Communication
Use the LEDs to Verify Network Communication You can use the LEDs on your MoCA adapters to make sure that they are powered up and can communicate with each other and the Ethernet local area network (LAN). Table 1: LEDs Activity POWER •... -
Page 11: Supplementary Information
Supplementary Information Table 2: Technical Specifications Feature Description Frequency range • MoCA: 1125 MHz—1525 MHz (D Band) • TV port: 5 MHz to 1004 MHz MoCA rev. MoCA 1.1 compliance Channel Channel bandwidth: 50 MHz Channel number: D1—D8 Power requirements Input voltage: 100—240 VAC, 50/60 Hz (power adapter) 12V DC, 1A... -
Page 12: Compliance
Table 2: Technical Specifications (Continued) Feature Description Maximum devices supported in MoCA environment Dimensions (with interfaces 109.8 x 95.6 x 27 mm and sockets) Regulatory compliance FCC, ESD Operating temperature 0—40°C Storage temperature -20—60°C Operating humidity 10%—95% Noncondensing Compliance FCC Statement The MC1001v3 has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 13 Consult a dealer or an experienced radio/TV technician for assistance FCC Caution: Any change or modification to the product not expressly approved by NETGEAR could void the user’s authority to operate the device. FCC RF Radiation Exposure and SAR Statements...
- Page 14 Canadian Department of Communications Industry Canada (IC) Notice This Class B digital apparatus complies with Canadian ICES-003 and RSS- 210. Cet appareil numérique de la classe B est conforme à la norme NMB- 003 et CNR-210 du Canada. Industry Canada Statement This device complies with RSS-210 of the Industry Canada Rules.