Schedule Blocking; Set Your Time Zone; Schedule Firewall Services - NETGEAR MVBR1210C User Manual

Mobile Voice HSPA+ Broadband 11n Wireless Router MVBR1210C

Schedule Blocking

The router uses Network Time Protocol (NTP) to obtain the current time and date from one of
several network time servers on the Internet.

Set Your Time Zone

To localize the time for your log entries, you need
to specify your time zone.

To set the time zone:
1. Log in to the router as described in
Your Router on page 12.
2. On the main menu under Content Filtering,
select Schedule:
3. Select your time zone. This setting will be used
for the blocking schedule according to your local
time zone and for time-stamping log entries.
If your time zone is currently in daylight savings
time, select the Automatically adjust for
daylight savings time check box.
4. Click Apply to save your settings.

Schedule Firewall Services

If you enabled service blocking in the Block Services screen or port forwarding in the Port
Forwarding/Port Triggering screen, you can set up a schedule for when blocking occurs or
when access is not restricted.

To schedule firewall services:
1. Log in to the router as described in
2. On the main menu, select Schedule. The Schedule screen displays.
3. To block Internet services based on a schedule, select Every Day, or select one or more
days. If you want to limit access completely for the selected days, select All Day. Otherwise,
to limit access during certain times for the selected days, fill in the Start Blocking and End
Blocking fields.
4. Enter the values in 24-hour time format. For example, 10:30 a.m. would be 10 hours and 30
minutes, and 10:30 p.m. would be 22 hours and 30 minutes. If you set the start time after the
end time, the schedule will be effective through midnight the next day.
5. Click Apply to save your changes.
Log In to
Log In to Your Router
Content Filtering
61
on page 12.