Using Preinstalled Software; Running The Operating System Setup Program - IBM 622138U - IntelliStation Z - Pro 6221 User Manual

v When you plug in your computer for the first time, Wake on LAN can turn on the
v If your computer was previously turned on, it must be properly turned off for the
What you see and hear when you start your computer depends on the features that
are installed and the settings in the Configuration/Setup Utility program.
If power-on self-test (POST) detects a problem, there might be a series of beeps or
no beep, and a numeric error message might appear on the screen. Write down
any beep series and error code numbers with descriptions, and then see
"Troubleshooting charts" on page 78 for the explanation of error codes.
During startup, the following messages might be displayed briefly:
v To start the Product Recovery Program, Press F11
v Press F1 for Configuration/Setup
v <<< Press <CTRL><C> to start LSI Logic Configuration Utility >>>
To use any of these features, press the appropriate function key or keys quickly.
The messages appear for only a few seconds. For more information about the
programs listed in these messages, see "Using the Configuration/Setup Utility
program" on page 21, "Using the LSI Logic Configuration Utility program" on page
24, and "Recovering your operating system and preinstalled software" on page 86.
During startup, you might not see Press F1 for Configuration/Setup. If you want
to see the prompt, see instructions for displaying the prompt in "Using the
Configuration/Setup Utility program" on page 21.
Use the Configuration/Setup Utility program to configure your computer with
passwords, PCI adapter configuration, and other options. The Configuration/Setup
Utility menu is displayed at the top of the screen. To navigate the menu and screen
items, follow the instructions on the right of the screen.
The operating system and application programs start from the hard disk. If your
computer is attached to a network, the computer will begin attaching to any LANs
and remote applications to which you have access. A network administrator can
also "wake up" your computer (start it remotely) to download programs or gather
information about computer performance. For more information, see "Wake on LAN"

Using preinstalled software

This section contains information to assist you in setting up the preinstalled
Microsoft operating system and describes how to use the programs that come with
your computer.

Running the operating system setup program

If you are starting your computer for the first time, the Microsoft Windows setup
program runs automatically when you start the computer. The program will prompt
you to make choices or type information. If you need more detailed information than
is provided in this User's Guide, see your Microsoft operating-system manual.
computer.
Wake on LAN feature to turn on the computer.
on page 18.
Chapter 2. Operating your computer
11