IBM 622138U - IntelliStation Z - Pro 6221 User Manual page 68

11. Insert the DIMM into the connector. Firmly press the DIMM straight down into
12. If you have other options to install or remove, do so now.
13. Push the drive cage outward, and press in on the drive-cage release tab; then,
14. Replace the support bracket (see "Removing and installing the support
15. Replace the side cover (see "Replacing the side cover" on page 53).
16. Reconnect the external cables and power cords. Turn on the attached devices,
46
IBM IntelliStation Z Pro Type 6221: User's Guide
the connector by applying pressure on both ends of the DIMM simultaneously.
The retaining clips snap into the locked position when the DIMM is firmly
seated in the connector. If there is a gap between the DIMM and the retaining
clips, the DIMM has not been correctly installed. Open the retaining clips,
remove the DIMM, then reinsert it.
rotate the cage back into the computer.
bracket" on page 33).
and turn on the computer.
DIMM 1
DIMM 2
DIMM 3
DIMM 4