Flow Control Disable/Enable - Honeywell NetAXS NX4S1 Installation Manual

NetAXS™ Standalone Operation
Standalone Commands
A.3.8 Flow Control Disable/Enable
(Use this command only for a dropline panel using RS-232 in standalone mode)
_U=[panel name]_{D|E}
Parameters:
D: Disable
E: Enable
Example:
_U=30_D
This disables the flow control on panel 30 and prevents the panel's buffers from
filling. After a hard re-set of the panel, the flow control is re-enabled.
58
www.honeywell.com