EPSON Stylus Pro 9000
5.3.7 Parameter menu
Using this menu, you can initialize various maintenance records and update
(modify) various parameters (adjustment settings). Note that the parameters
on this menu can also be modified from the Adjustment menu. You do not need
to update the parameters from both menus.
[SelecType]
Parameter: Init.
Parameter: Update
[Paper Source]
INITIALIZE
Use this menu to reset (re-initialize) any or all of the items listed below.
All
Ink Lever C record
Ink Lever B record
Cover record
Lever record
PF Motor record
CR Motor record
Waste Ink record
Wiper record
C Head record
B Head record
Serial Number
PF Resolution
Capping Mechanism
Adjustments
UPDATE
The items you can update are listed below. When you turn the printer off, the
new values are stored in flash memory on the printer's main board.
Capping Position
Head Rank (Printhead ID)
Print Position Items (Bi-D and Gap adjustments)
Paper Feed Distance
Mechanical Parameters (adjustment settings)
Ink Parameters
Lets you reset the Initial Ink Charge flag, causing the printer to perform the
initial ink charge the next time it's turned on.
Update: Ink Parameter
Paper Feed +/-
Update Parameter?
Enter
Updating Parameter
Init Ink Charge Flag: set
Init Ink Charge Flag: reset
129