Service Error Codes And Replaceable Parts; The Difference Between A 'Maintenance Call' And A 'Service Call - Epson Stylus Pro 9000 - Print Engine Service Manual

EPSON Stylus Pro 9000
6.5 Service Error Codes and Replaceable
Parts
When some consumable parts reach their predetermined end-of-life, a
"Maintenance Call" or "Service Call" message appears. (See
Between a 'Maintenance Call' and a 'Service Call'
maintenance procedures given in the table below.
Table 6-5. Service Error Codes and Replaceable Parts
LCD Message Maintenance Procedures
"Maintenance Call 0100"  Replace these parts:
Waste Ink Pads (R/L)
or

Pump Assembly
"Service Call 00000100" 
Capping Assembly

Flushing Box (R/L)

Printhead Cleaner Blade
 Perform these adjustments:
Waste Ink Counter Clear
(See
on page 17.)

Cleaner Counter (See
Maintenance Mode 2
page 17.)

Cutter Position Adjustment
(See
Adjustment

Replace the Ink Tubes
"Service Call 00000101" 
Clear the CR Motor Counter
(see
on page 17)
For a list of other service error codes, see
Maintenance
The Difference
at right.) Follow the
Reference
See
Maintenance
Procedures
page 67 for
detailed
instructions
Maintenance Mode 2
on
Cutter Position
on page 131.)
See Ink Holder
Disassembly
page 84 for
Maintenance Mode 2
detailed
instructions
LCD Error Messages on page 40.
6.5.1 The Difference Between a 'Maintenance Call'
and a 'Service Call'
A "Maintenance Call" means that a part needs to be replaced soon, or the
printer will no longer operate. A "Service Call" means the printer cannot
operate until it receives further attention.
For example, MAINTENANCE CALL 0100 appears on the display to warn that
the Waste Ink Pads are about 99% full and need to be replaced soon. The
printer continues printing even though this message appears instead of
READY or PRINTING.
When the Waste Ink counter determines that the Waste Ink Pads are
completely full, SERVICE CALL 00000100 appears and the printer stops
on
printing.
on
143