Epson Stylus Pro 9000 - Print Engine Service Manual page 142

EPSON Stylus Pro 9000
Table 6-4. Summary of Ways to Check and Clear Maintenance Counters (continued)
Ways to Check Counters
Self-Diagnostics: Test \ Elec.
(see Table 5-6 on page 114)
Wiper
Head Rubbing R/L
Rubbing
Cut (cutter blade)
Cutter Solenoid
Lock Solenoid

NOTE: To enter the Self-Diagnostic Mode, press Paper Feed Down + Cut/Eject + Cleaning while turning on the printer.

To enter Maintenance Mode 2, press Paper Source + Cut/Eject + Paper Feed Down while turning on the printer.

To view the Printer Status Menu, press the SelecType button when the printer is turned on but not printing. Press SelecType repeatedly until "Printer Status Menu"
appears. Press the Item button to select the item you want to view.
Maintenance
Self-Diagnostics: Adjustments \
Counter Clear (resets all the
Printer Status Menu
(see Table 1-7 on page 15) following counters); see
5-11
Cutter Life
Initial Charge Flag
Periodic Pseudo-Vacuum Flag
Firmware Version
Ways to Clear Counters
Maintenance Mode 2 (see
Table 1-12
on page 128
NVRAM
Self-Diagnostics: Parameter \
Table
Initialize (see
on page 17)
page 129)
Wiper
Capping Mechanism
Serial Number
PF Resolution
Table 5.3.7 on
142