Epson Stylus Pro 9000 - Print Engine Service Manual page 68

EPSON Stylus Pro 9000
1. Remove the screws that secure the Waste Ink Boxes to the printer (see the
figures below), and then remove the Waste Ink Boxes.
CP(W2) M4x8
Figure 4-18. Left Waste Ink Box
Disassembly & Assembly
Waste Ink Box L
CP(W2) M4x8 screws
Figure 4-19. Right Waste Ink Box
2. Remove the Waste Ink Pads from the left and right Waste Ink Boxes.
Prepare a vinyl bag beforehand for disposing of the pads.
After replacing the Waste Ink Pads, perform the following
adjustments:


reset the waste ink counter


reset the initial cleaning flag [???right name???]


perform the Cutter Position Adjustment
Waste Ink Box R
68