HP ML330 - ProLiant - G3 Setup And Installation Manual page 72

5. Install the expansion board:
a. Insert the expansion board into the slot.
b. Secure the board with a screw.
6. Connect any cables to the expansion board.
7. For a full-length expansion board, install the expansion board retainer. Reverse
the actions in step 4.
8. Install the access panel and front bezel. Refer to Chapter 2, "Server Operations."
To remove an expansion board, reverse the installation procedure.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
Hardware Options Installation
4-29