Component Identification; Features - HP ML330 - ProLiant - G3 Setup And Installation Manual

Features

The HP ProLiant ML330 Generation 3 server provides performance, reliability, and
ease of ownership with support for two Intel Xeon processors and up to 4 GB of ECC
Registered PC2100 DDR SDRAM memory, all running on a 533-MHz front-side
bus. Expansion support includes four 64-bit, 33-MHz PCI expansion slots.
Industry standard peripheral features include a Broadcom 5702, 10/100/1000 network
interface controller, keyboard/mouse/video connectors, dual USB ports, and serial
interface.
SCSI model servers ship with a single-channel Wide Ultra3 SCSI controller in a slot
and ATA model servers ship with an integrated dual-channel ATA/100 controller
with support for RAID 0, 1, and 1+0. The system has capacity for:
·
Five 36.4-GB non-hot-plug SCSI hard drives for a maximum of 182 GB of
internal storage
·
Four 80-GB ATA hard drives for a maximum of 320 GB of internal storage
·
Two 146.8-GB hot-plug SCSI hard drives in the optional two-bay hot-plug SCSI
drive cage and three 36.4-GB non-hot-plug SCSI hard drives for a maximum
storage capacity of 402.8 GB of internal storage
The server is rack-mountable within HP, Compaq branded, and most third-party
racks, with the optional rack-enabling kit. Telco support is possible with the
rack-enabling kit and optional telco rail kit.
For software features, refer to Chapter 5, "Server Configuration and Utilities."
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide

Component Identification

1
1-1