Hardware Options Installation
2. Install the DIMM:
a. Open the DIMM slot latches.
b. Insert the DIMM into the slot.
c. Close the DIMM slot latches.
NOTE: The latches may close automatically when the DIMM is properly inserted.
3. Install the access panel. Refer to Chapter 2, "Server Operations."
4. Install the front bezel. Refer to Chapter 2, "Server Operations."
4-6
CAUTION: A DIMM can be installed only one way or damage will result. Be sure
to match the key slot on the DIMM with the tab on the DIMM socket. Push the
DIMM down into the socket, ensuring that it is fully inserted and properly seated.
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide